*** FREE SHIPPING ON ALL ORDERS - AUSTRALIA WIDE ***
Install Your Dnoodle® Like A Legend
No clamps. No bolts. No tools required.
The Dock and Key auto-engage with a confident, satisfying feel.
Twist to release.
Designed for flat, sealed surfaces — from boat decks to inflatables.
Installs in minutes.

Before You Start
Pick a flat, sealed surface (fibreglass, alloy, PVC, etc.).
This is a permanent setup - so choose your spot wisely.
Got multiple rigs? Grab another Dnoodle so you can stick one on everything.
Step By Step:
How To Install Your Dnoodle®
Clean the installation surface using the supplied alcohol wipe.
- Position the Dock
- Peel off the adhesive backing. Align the Dock so the Dnoodle logo is upright and readable from your normal viewing position.
- Press down firmly for 30 seconds to activate adhesive.
- Attach the Key Plate (Blue) to the Dock Plate (Red).
- The two parts engage strongly by design.
- If you need to separate the parts... Twist to release.
Do not attempt to pry them apart.
- Select your device: phone, drinkware, GPS, action camera or tablet
- Clean the mounting surface using the supplied alcohol wipe.
- Peel the backing from the blue Key and position your item carefully. Set the orientation you want when mounted — it will lock in that way every time.
- Press your gear down firmly for 30 seconds. Take care with devices — apply pressure to the back or sides, not directly on screens.
- Give it a 90° twist in either direction to release.
- Slide it back on and feel it engage — solid and deliberate.
- That’s Dnoodle® doing exactly what it’s designed to do.
For best performance, allow the adhesive to cure for 24 hours before heavy use.
Need To Remove It?
We don’t recommend uninstalling unless you’re switching gear or changing rigs. But if you must:
Grab fishing line or dental floss.
Slide it under the plate while gently prying upward.
Go slow - it’s tough by design.
Roll off residue by hand or use adhesive remover (test first).
Never use sharp tools - unless you like gouges.
Not Just for Cups. Not Just for Boats.
Dnoodle® holds:
Testimonials
Real-World Proof From the Crew
See Real Setups On InstagramJoin The #DnoodleChallenge

Ready To Mount Like A Pro? Start Here:
Dnoodle® Full Set up
$90 Start HereEverything you need to start your Dnoodle system. Fixed mount for a rock-solid hold. Install once and you’re set.
- 1 Dock Plate
- 1 Key Plate

Anywhere Kit
$220- $260 - Add flexibilityTake your setup anywhere. Mount to smooth surfaces or rails — your choice.
- 1 Dock Plate
- 1 Key PlateRAM® Medium ArmChoice of RAM® Suction Cup or Tough Claw™

Boat Kit
$329
From consoles to rails —
locked down,
wherever you mount it.Swap gear in seconds —
lock in your phone, drink or gear and go..- 1x Dock Plate
- 2 Key Plates (cup, phone)
- 1x RAM® Medium Arm
- 1x RAM® Medium Tough Claw™
- 1x RAM® Suction Cup Mount

Tradie Twin Set
$429 Your ultimate set upYour third strong arm...
holds your gear from ute to site and a bonus weekend set up for your boat.- 2 Dock Plates
- 4 Key Plates
- 1 RAM® Medium Arm
- 1 RAM® Medium Tough Claw™
- 1 RAM® Suction Cup Mount


And Yep - FREE SHIPPING ON EVERY ORDER
No fine print. No limits. No catch.
























